Hand dryers with automatic electronic sensor. Dimensions: 323 high x 253 width x 152 depth (mm).
Available with the following finishes:
– Automatic Electronic hand dryers.
– Anti-Vandal and resistant.
– Without sharp sides or sharp edges for safe use.
– Suitable for communities and commercial places of high frequency of use.
– In accordance with the rules of LVD (Low Voltage Directive), EMC (Electromagnetic Compatibility), and the European directives in force.
.
– Frequency/Voltage: 220-240V – 50/60 Hz.
– Maximum consumption 6.5 A.
– Total Power 1500 W.
– Power Electrical Resistance: 1400 W.
– Wire Resistance Ni-Cr. Ceramic support.
– Engine Power: 100 W.
– Electrical Insulation: Class II.
– Protection Index: IP21.
– Universal Brushless Motor (does not require maintenance).
– Engine speed 2800 rpm
– Electrical protection of the resistance with resettable thermostat.
– Double safety fuse set to 100ºC.
– The appliance is delivered without plug or cable.
– Case of a single piece of stainless steel AISI 304 glossy finish (thickness =1.2 mm).
– Protective grille of polycarbonate. ABS plastic V0 fire resistant.
– Wall- mount using 3 holes (Ø 8 mm). Mounting materials included.
– Infrared electronic sensor that stops the operation when the hands are removed from the active range.
– Distance sensor: 8 to 50 cm.
– Air Temperature (Ambient temperature 21ºC): 51ºC.
– Air Flow – 2300 l/min (138 m3/h) speed 65 km/h. – Level noise (2 meters): 60 dB.
– Overall Dimensions: 323 high x 253 width x 152 depth (mm).
– Individual packaging Dimensions: 360x300x190 mm.
– Net weight: 3.4 kg.
– Directions if Use: Place your hands under the appliance. The dryer is automatically activated, remaining in operation while the hands are within the range of the sensor. The appliance turns off after a few seconds of withdrawing them.
– Cleaning: Cleaning is recommended with a cotton cloth lightly dampened in a soapy solution. Then dry.